> > show run は特に何もない
> > show versionはこんなかんじ
> > ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (f
> > c1)
> > ROM: 3600 Software (C3620-J1S3-M), Version 12.3(21), RELEASE SOFTWARE (fc2)
> > Router uptime is 2 minutes
> > System returned to ROM by power-on
> > System image file is "flash:c3620-j1s3-mz.123-21.bin"
> > cisco 3620 (R4700) processor (revision 0x81) with 61440K/4096K bytes of memory.
> > Processor board ID 26730739
> > R4700 CPU at 80MHz, Implementation 33, Rev 1.0
> > Bridging software.
> > X.25 software, Version 3.0.0.
> > TN3270 Emulation software.
> > 4 Ethernet/IEEE 802.3 interface(s)
> > DRAM configuration is 32 bits wide with parity disabled.
> > 29K bytes of non-volatile configuration memory.
> > 16384K bytes of processor board System flash (Read/Write)
> > Configuration register is 0x2102
> 12.3か、まあ一通りBGPしゃべるまではできるな
> ポート教えてよ
> sh ip int brieの結果貼って

全部10baseｲｰｻだよ
ふと思ったんだけどこれってOSPFができない？
何ができそう？(;´Д`)

Router#show ip int brief
Interface                  IP-Address      OK? Method Status                Prot
ocol
Ethernet0/0                unassigned      YES NVRAM  administratively down down

Ethernet0/1                unassigned      YES NVRAM  administratively down down

Ethernet1/0                unassigned      YES NVRAM  administratively down down

Ethernet1/1                unassigned      YES NVRAM  administratively down down

参考：2009/11/03(火)20時11分32秒